Skip to main content

Sani Flow Pumps

The following topics are discussed on this page:

  • Introduction
  • Sani Flow pumps to suit Toilets.
  • Pumps to suit your kitchens and Laundry
  • Pumps to suit Bathrooms.
  • CURRENT PLUMBING SPECIALS.

Introduction

Sani flow pumps are designed to make it possible to install a fixture just about anywhere. If you have a power source close by and space to fit the compact unit, your options are nearly limitless.

Sani flow has a  wide range of pumps that are best suited for a vast array of situations.

I have put together a user guide below with links to Sani flow to help you find the product that best suits your situation.

Included are the dimensions of the product as this is, very often, a critical and determining factor when helping choose the right set-up.

Toilets – (Toilets, Wall Hung Toilets, Basins)

https://www.saniflo.com.au/12-installing-a-toilet

Watch this video to get a deeper understanding of what the sani Flow pump brand has to offer.

Sani flow Access

The SANIACCESS 2 allows for drainage of the wastewater from a toilet and can pump it 5 m vertically or up to 100 m horizontally.

The SANIACCESS 2 is equipped with a double-access hatch and facilitates maintenance interventions in case of blockage. The need to disassemble the device or empty the tank is eliminated. This product is one of the quietest lines of macerators on the market with only 46dB

The SANIACCESS 2 can fit on a traditional P pan bowl and can be installed with ease, without any modifications. It is able to drain wastewater and sewage up to 5 meters vertically or 100 meters horizontally.

The SANIACCESS 2 can discharge the waters of a toilet as well as a washbasin, thanks to having two different inlets.

This Sani flow product is approximately 350mm high425mm wide and approx. 220mm deep.

Sani Flow Access 3

The SANIACCESS 3 allows the drainage of the water of an entire bathroom (toilet, bidet, wash-basin, and shower) up to 5 m in height or up to 100 m horizontally.

The SANIACCESS 3 is also equipped with a double-access hatch and facilitates maintenance interventions in case of blockage. Disassembling the tank is no longer necessary when emptying. This Sani flow product is one of the quietest lines of macerators on the market with only 46dB

This SANIACCESS 3 can fit on a traditional P pan bowl. It can be installed with ease, without any modifications and will drain your wastewater and sewage up to 5 meters vertically or 100 meters horizontally.

The SANIACCESS 3 can discharge the waters of a toilet, a bidet, a washbasin as well as a shower, thanks to its two drainage intakes.

This Sani flow product is approximately 350mm high495mm wide and approx. 230mm deep.

Sani flow – PackPro and up

This Product is the only macerator which can be completely installed in a wall cavity and is ideal for installing a wall-hung toilet.

Equipped with an access hatch, this product facilitates maintenance in case of blockages, without the need to disassemble the device or empty the tank! This is one of the quietest macerators on the market with only 47dB.

The pump can be installed with ease and used to transfer waste water up to 5 meters vertically and 100mm horizontally.

This Sani flow product is approximately 380mm high475mm wide and approx. 170mm deep.

Sani Flow – Sani Slim

This product enables you to install a completely new bathroom with 2 side inlets, you can include a WC, basin, Bidet, and shower in your new room with just one unit.

The sani slim product is approximately 330mm high450mm wide and approx. 145mm deep.

Sani Flow – Sani Top

This product has a powerful macerator that necessitates the installation of an additional WC and washbasin where access to the main sewer is impracticable. SANITOP enables you to install a WC and washbasin -even below sewer level or where you need to pump waste up and away.

The maximum water inlet temperature is 35 Celsius for this pump.

This Sani flow product is approximately 340mm high330mm wide and approx. 210mm deep.

Sani Flow – Sani Plus

This product is ideal for installing an additional bathroom including a toilet, basin, shower, or bath.

A high capacity unit that will enable you to install a full bathroom on any finished floor. The pump is designed to sit behind a P-trap toilet, and wastewater can then also be drained by gravity from a shower, bath, wash-basin, and washing machine to the inlets on either side of the unit.

This Sani flow product is approximately 340mm high510mm wide and approx. 235mm deep.

The maximum incoming water temperature is 35 degree Celsius.

Sani flow – Sani Pro

This macerator has multiple inlets that allow you to connect a washbasin, a shower; in addition to a toilet. It has a sleek and modernized design, it fits discreetly behind a toilet and it’s easy to install even below sewer level or where you need to pump waste up and away. It can discharge the wastewater up to 5 meters vertically or 100 meters horizontally.

The maximum water inlet temperature is 35 degrees Celsius.

This product is approximately 340mm high330mm wide and approximately 210mm deep.

Sani Flow – Sani Ivite

Sanivite’s powerful pump has up to four inlets for connections to domestic sinks or appliances.

The Sani flow sani vite is approximately 350mm high415mm wide and approximately 235mm deep.

Kitchen and Laundry, (Washing Machine, Dish Washers, Kitchen Sinks)

https://www.saniflo.com.au/14-installing-a-kitchen-or-laundry-room

Sani Flow – Sani Combi 1

This is the most compact and simple solution for a private home or light commercial application such as an office.

  • Compact design
  • Ability to pump wastewater
  • up to 90°C (except wastewater from the toilet)

Sani Flow – Sani Combi 2

A compact solution, ideal for intensive use in a private home or light commercial such as an office.

  • Compact design
  • Ability to pump water of up to 90°C
  • Comes with remote control
  • 2 pumps in alternate use for more intensive use

Bathrooms (Washbasins, Showers, Toilets, Bathtubs)

https://www.saniflo.com.au/13-installing-an-additional-bathroom

Sani flow Access 2

The SANIACCESS 2 allows for drainage of the wastewater from a toilet and can pump it 5 m vertically or up to 100 m horizontally.

The SANIACCESS 2 is equipped with a double-access hatch and facilitates maintenance interventions in case of blockage, without the need to disassemble the device or empty the tank! This Sani flow product is one of the quietest lines of macerators on the market with only 46dB

This SANIACCESS 2 can fit on a traditional P pan bowl and can be installed with ease without any modification.

The SANIACCESS 2 can discharge the waters of a toilet as well as a washbasin, thanks to having two different inlets.

This Sani flow product is approximately 350mm high425mm wide and approximately 220mm deep.

Sani Flow Access 3

The SANIACCESS 3 allows the drainage of the water of an entire bathroom (toilet, bidet, washbasin, and shower) up to 5 m in height or up to 100 m horizontally.

SANIACCESS 3 is also equipped with a double-access hatch and facilitates maintenance interventions in case of blockage, without the need to disassemble the device or empty the tank! This Sani flow product is one of the quietest lines of macerators on the market with only 46dB

The SANIACCESS 3 can fit on a traditional P pan bowl. It can be installed with ease, without any modifications and will drain your wastewater and sewage up to 5 meters vertically or 100 meters horizontally.

The SANIACCESS 3 can discharge the waters of a toilet, a bidet, a washbasin as well as a shower. All thanks to its two drainage intakes.

The Sani Flow product is approximately 350mm high, 495mm wide and approximately 230mm deep.

Sani Flow – Sani Compact 43

The SANICOMPACT 43 is a toilet with an integrated grinder that does not require any external tank. This is the most compact in the SFA range.

Only 43cm deep, it is ideal for small spaces: studios, cupboards, to replace a bidet, below stairs, etc. Its 32mm evacuation diameter ensures discretion.

Fitted with the new economic dual-flush “ECO+”, the SANICOMPACT 43 consumes only 1.8L to 3L per flush.

This product can pump 3meters vertically and 30 meters horizontally.

Sani Flow – Sani Floor +1/ +2/ +3/ +4

Bathroom renovators and end of trip facilities should use this product to save on building cost and time.

SANIFLOOR+ includes a suction pump and a plug and makes it possible to install a walk-in shower without the need for major building work. A wireless detection system in the plug makes fitting particularly easy. The replaceable detection unit also simplifies maintenance.

The SANIFLOOR+ has 4 versions for all the floor coverings on the market.

– SANIFLOOR1 for tiled floors

– SANIFLOOR2 for flexible floors

– SANIFLOOR3 For extra-flat shower trays

– SANIFLOOR4 For tiled shower trays

This product is approximately 300mm high,  300mm wide and approx. 170mm deep.

Sani Flow – Sani Shower

An ideal solution for installing a new shower in any location without the need for major installation work. The difference here over the sani floor range is that these units do require the shower drain to be gravity feed.

  • Small size.
  • Low volume trigger.
  • Low noise level: 46 dB(A).

This product is approximately 150mm high360mm wide and approximately 170mm deep.

Future Projects

All previous clients will enjoy the benefits of being a Yates Plumbing and Gas VIP Member.

To view member benefits, go to our home page.

CURRENT PLUMBING SPECIALS

  • All Sani Flow pumps installations receive pumps at trade price and 10% off installation.
  • Purchase 3 plumbing for $249
  • Buy 10 plumbing hours for $790.
  • Buy 20 plumbing hours for $1500.